Topolymer 5313-C
Topolymer® 5313-C series is a halogen-free fire-retardant TPE that is easy to process and design. It is made of Kraton and Kuraray polymer modification. It is specially used for extrusion molding of various power cords and earphone cords with halogen-free flame retardant requirements. . The fire rating reaches VW-1.
key word:
Category:
TPE-5000
Topolymer 5313-C
Graphic details
Product Description:
Topolymer® 5313-C series is a halogen-free fire-retardant TPE that is easy to process and design. It is made of Kraton and Kuraray polymer modification. It is specially used for extrusion molding of various power cords and earphone cords with halogen-free flame retardant requirements. . The fire rating reaches VW-1.
colour:
True colors.
feature:
Soft touch, excellent coloring performance, tear resistance, tortuous resistance, weather resistance and heat resistance.
Processing technology:
Squeeze out.
Washing machine:
Clean the machine thoroughly before using the Topolymer® 5313-C series. You can use the fluidity (0.5-2.5 MFR) (PE) or (PP).
Recycle:
The recycled nozzle will slightly change the physical properties, but it must be ensured that the recycled material is not contaminated. In order to reduce loss, the lowest possible temperature can be used during injection molding, and the final recycling effect needs to be determined by the customer.
dry:
For better processing, it is recommended to bake the material at 80℃/1~2 hours before processing.
Forming processing:
Topolymer® 5313-C can be processed with traditional extrusion equipment, and the processing temperature is between 140°C and 200°C, and cannot exceed 220°C. If the residence time in the screw is too long, the physical properties will change. Generally speaking, if the machine is stopped for more than 20 minutes, the screw should be completely emptied.
| Extrusion molding conditions | |
| Melting temperature | 170-200℃ |
| One zone temperature Two zone temperature Three zone temperature Machine head temperature Eye mold temperature |
140-160℃ 160-180℃ 170-200℃ 170-200℃ 170-200℃ |
| Filter | 100-150 mesh |
| Screw compression ratio | 3:1 |
*The molding conditions in the table are for reference only! The specific molding process depends on the specific product of the customer!
Related products
Topolymer® 9236-P is a blend processed by dynamic vulcanization technology. With excellent comprehensive performance, it can be molded separately or used in PP over-injection molding.
Topolymer® 9211-P is a blend processed by dynamic vulcanization technology. With excellent comprehensive performance, it can be molded separately or used in PP over-injection molding.
Topolymer® 8201-A is an easy-to-process design TPE made of Kraton and Kuraray polymers. It can be used for transparent products for outdoor use, such as diving supplies, stationery and other sports equipment; for PP and PE adhesive products, etc.
Topolymer® 8200-T/C/A is an easy-to-process design TPE made of Kraton and Kuraray polymers. Topolymer® 8200-T/C/A is suitable for forming various elastic insoles, soft shoulder pads, models, trademark logos, elastic massage cushions, adult simulation appliances, toy dolls, elastic balls, sticky toys, etc.
Online Message
Please take a minute to fill in the information and leave us a message, Our staff will deal with your problem as soon as possible.
Follow Us
COPYRIGHT 2022 Dongguan Renergy Plastic Technology Co.,Ltd. All copyrights