Topolymer9236-P
Topolymer® 9236-P is a blend processed by dynamic vulcanization technology. With excellent comprehensive performance, it can be molded separately or used in PP over-injection molding.
key word:
Category:
TPE-9000
Topolymer9236-P
Graphic details
Product Description:
Topolymer® 9236-P is a blend processed by dynamic vulcanization technology. With excellent comprehensive performance, it can be molded separately or used in PP over-injection molding.
colour:
True colors.
feature:
Soft touch,
Excellent resistance to tearing and tortuosity
Excellent solvent resistance, weather resistance and heat resistance,
Can be used safely in the temperature range of -40℃～135℃
It has good adhesion with PP.
Processing technology:
Injection molding.
Coloring:
The toner with PP, EVA, or PE with a lower specific gravity as the carrier can be used for the coloring of Topolymer® 9236-P, and the toner with PVC substrate cannot be used. Top Polymer can also provide a higher concentration of color matching, but the final toner ratio needs to be determined by the customer.
Washing machine:
Clean the machine thoroughly before and after using Topolymer® 9236-P. You can use a fluidity of (0.5-2.5 MFR) (PE) or (PP).
Recycle:
The recycled nozzle will slightly change the physical properties, but it must be ensured that the recycled material is not contaminated. In order to reduce loss, the lowest possible temperature can be used during injection molding, and the final recycling effect needs to be determined by the customer.
dry:
unnecessary.
Processing:
Topolymer® 9236-P has excellent fluidity. If the residence time in the screw is too long, the physical properties will change. Generally speaking, if the machine is stopped for more than 20 minutes, the screw should be completely emptied.
| Injection molding conditions | ||
| Heating temperature | Discharging mouth, middle section, front section, nozzle |
120℃-160℃ 180℃-210℃ 180℃-210℃ 160℃-200℃ |
| Mold temperature | 40℃-60℃ | |
| Screw speed | 30rpm-80rpm | |
| Degumming pressure | 3MPa-10MPa | |
| Screw length to diameter ratio: 22:1 | ||
*The molding conditions in the table are for reference only! The specific molding process depends on the specific product of the customer!
| Extrusion molding conditions | |
| Melting temperature | 170-200℃ |
| One zone temperature Two zone temperature Three zone temperature Machine head temperature Eye mold temperature |
140-160℃ 160-180℃ 170-200℃ 170-200℃ 170-200℃ |
| Filter | 100-150 mesh |
| Screw compression ratio | 3:01 |
*The molding conditions in the table are for reference only! The specific molding process depends on the specific product of the customer!
Related products
Topolymer® 9236-P is a blend processed by dynamic vulcanization technology. With excellent comprehensive performance, it can be molded separately or used in PP over-injection molding.
Topolymer® 9211-P is a blend processed by dynamic vulcanization technology. With excellent comprehensive performance, it can be molded separately or used in PP over-injection molding.
Topolymer® 8201-A is an easy-to-process design TPE made of Kraton and Kuraray polymers. It can be used for transparent products for outdoor use, such as diving supplies, stationery and other sports equipment; for PP and PE adhesive products, etc.
Topolymer® 8200-T/C/A is an easy-to-process design TPE made of Kraton and Kuraray polymers. Topolymer® 8200-T/C/A is suitable for forming various elastic insoles, soft shoulder pads, models, trademark logos, elastic massage cushions, adult simulation appliances, toy dolls, elastic balls, sticky toys, etc.
Online Message
Please take a minute to fill in the information and leave us a message, Our staff will deal with your problem as soon as possible.
Follow Us
COPYRIGHT 2022 Dongguan Renergy Plastic Technology Co.,Ltd. All copyrights