Topolymer8201-A
Topolymer® 8201-A is an easy-to-process design TPE made of Kraton and Kuraray polymers. It can be used for transparent products for outdoor use, such as diving supplies, stationery and other sports equipment; for PP and PE adhesive products, etc.
key word:
Category:
TPE-8000
Topolymer8201-A
Graphic details
Product Description:
Topolymer® 8201-A is an easy-to-process design TPE made of Kraton and Kuraray polymers. It can be used for transparent products for outdoor use, such as diving supplies, stationery and other sports equipment; for PP and PE adhesive products, etc.
colour:
transparent.
feature:
Good transparency, excellent UV resistance, ozone resistance, good bending resistance, excellent touch, no oil leakage, and can be used outdoors.
Processing technology:
Injection molding.
Coloring:
The toners with PP, EVA, or PE with lower specific gravity as the carrier can be used for the coloring of Topolymer® 8201-A.
Washing machine:
Clean the machine thoroughly before and after using Topolymer® 8201-A. You can use a fluidity of (0.5-2.5 MFR) (PE) or (PP).
Recycle:
The recycled nozzle will slightly change the physical properties, but it must be ensured that the recycled material is not contaminated. In order to reduce loss, the lowest possible temperature can be used during injection molding, and the final recycling effect needs to be determined by the customer.
dry:
unnecessary.
Processing:
Topolymer® 8201-A has excellent processing fluidity. 150℃-280℃ is its safe processing temperature.
| Injection molding conditions | ||
| Heating temperature | Discharging mouth, middle section, front section, nozzle |
120℃-160℃ 180℃-220℃ 180℃-220℃ 160℃-200℃ |
| Mold temperature | 40℃-60℃ | |
| Screw speed | 30rpm-80rpm | |
| Degumming pressure | 3MPa-10MPa | |
| Screw length to diameter ratio: 22:1 | ||
*The molding conditions in the table are for reference only! The specific molding process depends on the specific product of the customer!
Related products
Topolymer® 9236-P is a blend processed by dynamic vulcanization technology. With excellent comprehensive performance, it can be molded separately or used in PP over-injection molding.
Topolymer® 9211-P is a blend processed by dynamic vulcanization technology. With excellent comprehensive performance, it can be molded separately or used in PP over-injection molding.
Topolymer® 8201-A is an easy-to-process design TPE made of Kraton and Kuraray polymers. It can be used for transparent products for outdoor use, such as diving supplies, stationery and other sports equipment; for PP and PE adhesive products, etc.
Topolymer® 8200-T/C/A is an easy-to-process design TPE made of Kraton and Kuraray polymers. Topolymer® 8200-T/C/A is suitable for forming various elastic insoles, soft shoulder pads, models, trademark logos, elastic massage cushions, adult simulation appliances, toy dolls, elastic balls, sticky toys, etc.
Online Message
Please take a minute to fill in the information and leave us a message, Our staff will deal with your problem as soon as possible.
Follow Us
COPYRIGHT 2022 Dongguan Renergy Plastic Technology Co.,Ltd. All copyrights