Topolymer3200
Topolymer® 3200 series is a kind of high permeability TPE that is easy to process and design. It is suitable for extrusion processing and is used in various transparent headphone cables, power cables, audio cables, etc.
key word:
Category:
TPE-3000
Topolymer3200
Graphic details
Product Description:
Topolymer® 3200 series is a kind of high permeability TPE that is easy to process and design. It is suitable for extrusion processing and is used in various transparent headphone cables, power cables, audio cables, etc.
Performance characteristics:
Good transparency, light weight, good hand feeling and easy processing.
Clean machine:
Before using Topolymer® 3200, clean the processing machine with PP or PE. Topolymer® 3200 cannot be compatible with PVC. If you want to share a processing machine with PVC, you need to clean the machine thoroughly.
Recycle:
Topolymer® 3200 can be 100% recycled, but it must be ensured that the recycled material is not contaminated. The physical properties of the recycled material will be slightly changed. In order to reduce loss, the lowest possible temperature can be used during injection molding, and the final recycling effect of the nozzle is determined by the customer.
use:
Based on the consideration of the material characteristics of Topolymer® 3200, customers are not advised to use Topolymer® 3200 in blending with other raw materials.
store:
Topolymer® 3200 is packaged in 25kg paper bags. The raw materials and finished products should be stored under normal temperature and ventilated environment without PVC. For more detailed information about Topolymer®, please refer to the Material Safety Data Sheet.
Molding conditions:
Topolymer® 3200 can be processed with traditional extrusion equipment. The processing temperature is between 140°C and 200°C and cannot exceed 220°C. The unpacked raw materials must be dried at 80°C/3 hours before use.
| Extrusion molding conditions | |
| Melting temperature | 170-200℃ |
| One zone temperature Two zone temperature Three zone temperature Machine head temperature Eye mold temperature |
60-100℃ 140-180℃ 140-190℃ 140-190℃ 140-200℃ |
| Filter | 100-150 mesh |
| Screw compression ratio | 3:1 |
*The molding conditions in the table are for reference only! The specific molding process depends on the specific product of the customer!
Related products
Topolymer® 9236-P is a blend processed by dynamic vulcanization technology. With excellent comprehensive performance, it can be molded separately or used in PP over-injection molding.
Topolymer® 9211-P is a blend processed by dynamic vulcanization technology. With excellent comprehensive performance, it can be molded separately or used in PP over-injection molding.
Topolymer® 8201-A is an easy-to-process design TPE made of Kraton and Kuraray polymers. It can be used for transparent products for outdoor use, such as diving supplies, stationery and other sports equipment; for PP and PE adhesive products, etc.
Topolymer® 8200-T/C/A is an easy-to-process design TPE made of Kraton and Kuraray polymers. Topolymer® 8200-T/C/A is suitable for forming various elastic insoles, soft shoulder pads, models, trademark logos, elastic massage cushions, adult simulation appliances, toy dolls, elastic balls, sticky toys, etc.
Online Message
Please take a minute to fill in the information and leave us a message, Our staff will deal with your problem as soon as possible.
Follow Us
COPYRIGHT 2022 Dongguan Renergy Plastic Technology Co.,Ltd. All copyrights